FFB LogoFirst  Flight Bicycles

216 S. Center St.  Statesville, NC   (704)878-9683 


Road Parts For Sale

Miscellaneous vintage  items for sale.  Some of these pictures are older low-resolution images.  As time allows, we will try to update them.

 


 Frames/Posts

For other frames and fork CLICK HERE

Purchase

Click for more pictures
1996+/- Trek Y Foil carbon road frame and fork: Trek made these carbon fibers frames for just a couple f years and they usually had big gaudy decals on the sides of them.  We had one that had cracked so this frame was to replace that frame.  The customer decided to just get a whole new bike and we took the new frame in on trade.   They had is painted solid silver which looks much cleaner.  Over the years, the clear coat on the paint softened up and most of it wiped right off.  The frame is brand new and never been built.  The clear coat is off the frame and there are some nicks from being around the shop for 15 years.  Size is 56 with 56 top tube, head tube is 4X by 1", 130mm OLD, 68 mm bottom bracket shell.  New old stock Ritchey headset and Control Tech stem are included.  $649  


Click for more pictures
1970's Fastab tandem frame and fork, by Tom Boyden of Garland, TX: Lugged tandem frame from the late 1970's.  1" head tube, fork included, stoker stem included, uses a timing ring for tension (no pulley), cantilever / V brake compatible, Suntour drop outs, 126mm rear spacing.  Captain is 22" c-c with 22" top tube.  Stoker is 21" c-c with 23" top tube.  Twin boom tubes, 68mm bottom brackets.  Rattle can paint job with overspray. Shipping will likely be around $150  $349  

POST27 Campagnolo seat post:  25.0mm diameter, road length, aero top section, hard to find size $45  

Stems  For other stems  CLICK HERE  
LSTEM69pic(4).gif (109 bytes) Ritchey Comp Lite Road:  1" quill type stem, 26.0 clamp,  silver colored, 130mm length  80 degree $30  

LSTEM89pic(4).gif (109 bytes) Pivo: 22.2  quill, 25.4 bar, 70 mm extension, NOS but heavy shop wear$20  

LSTEM108pic(4).gif (109 bytes) Syncros: 22.2 quill, 26.0 bar,130 extension, black.  $35  

LSTEM124pic(4).gif (109 bytes)  Raleigh Roadster stem, 7/8" bar, 22.2 quill, Raleigh crest stamped on top, very light corrosion$15  

LSTEM146pic(4).gif (109 bytes) Syncros: QUILL ROAD HINGED 26.0, -17 Degree 130MM BLACK.  $50  

LSTEM148pic(4).gif (109 bytes) Syncros: QUILL ROAD 26.0, -17 Degree 120MM BLACK.   $40  

LSTEM149pic(4).gif (109 bytes) Syncros: QUILL ROAD HINGED 26.0, -17 Degree 120MM POLISHED.  $50  

LSTEM153pic(4).gif (109 bytes) Syncros: QUILL ROAD 26.0, -17 Degree 130MM BLACK.  $40  

LSTEM154pic(4).gif (109 bytes) Syncros: ROAD 26.0, -17 Degree 90MM POLISHED, hinged clamp.  $40  

LSTEM155pic(4).gif (109 bytes) Syncros: ROAD AHEAD 26.0, -17 Degree 130MM POLISHED, hinged clamp, includes hard to find Syncros-specific top cap.
  $40
 

LSTEM156pic(4).gif (109 bytes) Syncros: QUILL ROAD 26.0, -17 Degree 80MM BLACK.   $40  

LSTEM158pic(4).gif (109 bytes) Syncros: QUILL ROAD 26.0, -17 Degree 130MM POLISHED.  $40  

LSTEM159pic(4).gif (109 bytes) Syncros: QUILL ROAD 26.0, -17 Degree 80MM POLISHED.  $40  

LSTEM162pic(4).gif (109 bytes) Syncros: QUILL ROAD 26.0, 0 Degree 125MM BLACK.  $55  

LSTEM163pic(4).gif (109 bytes) Syncros: QUILL ROAD 26.0,  0 Degree 125MM POLISHED  $55  

LSTEM165pic(4).gif (109 bytes) Syncros: QUILL ROAD 26.4MM -17 Degree 100MM Black.  $40  

LSTEM166pic(4).gif (109 bytes) Syncros: QUILL ROAD 26.4MM -17 Degree 110MM Black.  $40  

LSTEM169pic(4).gif (109 bytes) Syncros: QUILL ROAD 26.4MM -17 Degree 110MM POLISHED.  $40  

LSTEM170pic(4).gif (109 bytes) Syncros: QUILL ROAD 26.4MM -17 Degree 130MM POLISHED.  $40  

Tape and Grip For other tapes and grips CLICK HERE  
TAPE27 Cateye cloth: red cotton tape, need 2 per bike  $3 each  

Shifters For other shifters  CLICK HERE  
SHIFT78pic(4).gif (109 bytes) Huret:  clamp-on shifter, large knob, side mount, made in France, with cable (2 pictured for clarity)$12 each  

SHIFT125pic(4).gif (109 bytes) Shimano 600 AX down tube shifters: from the early 1980's Aero series of components, rubber lever insert for grip.  $25  

SHIFT128pic(4).gif (109 bytes) Shimano Dura Ace EX spare parts: includes the 2 curved bosses that fit against the frame, plastic washers and tension screws with "D" rings$5  

SHIFT143pic(4).gif (109 bytes) Sachs Huret down tube shifters: beautifully sculpted down tube friction shifters.  I think they are nicer looking than the $43 Silver shifters from Rivendell$25  

SHIFT162pic(4).gif (109 bytes) Suntour down tube Power retro-friction shift levers : retro-friction action makes for nice light shifting, down tube clamp mount style.  $35  

SHIFT194pic(4).gif (109 bytes) Suntour Top Mount, down tube clamp, auto trim front derailleur (as you shift the rear derailleur, the front shifter automatically trims the front derailleur to prevent rubbing).  $20  

SHIFT203pic(4).gif (109 bytes) Campagnolo bar end friction shifters: regular friction mode down tube shifters. Missing lock nuts on the sides.  $40   

SHIFT208pic(4).gif (109 bytes) Shimano Positron shifter w/ cables:  Hard to find Positron parts.  If you need it, you know what it is!  $25  

Cranks/Pedals For other cranks and pedals CLICK HERE  
LCRANK100pic(4).gif (109 bytes) Sugino to fit TA pattern : 28 tooth, silver, these will fit the TA Cyclotourist cranks or the Sugino made copies.  $15  

LCRANK101pic(4).gif (109 bytes) Sugino to fit TA pattern : 36 tooth, silver,  these will fit the TA Cyclotourist cranks or the Sugino made copies.  $18  

LPEDAL50pic(4).gif (109 bytes) Shimano toe clips for "triangle" shaped pedals: new, size medium, only fits Shimano pedals, plastic.  $20  

LPEDAL54pic(4).gif (109 bytes) Shimano toe clips for "triangle" shaped pedals: new, size X-large, only fits Shimano pedals, plastic.  $20  

LPEDAL55pic(4).gif (109 bytes) Shimano toe clips for "triangle" shaped pedals: new, size large, only fits Shimano pedals, plastic.  $20  

Brakes/Levers For other brakes  CLICK HERE   For other
levers CLICK HERE
 
LLEVER48pic(4).gif (109 bytes) Dia Compe 287 Tandem: Nice aero levers that can be used to pull 2 cables with 1 lever, great for cantilever brakes, MSRP $80, now $65  

LLEVER49pic(4).gif (109 bytes) A'ME Hoods: fits Dia Compe or Weinmann, the last couple of pairs are pretty dirty and will need cleaned, non-aero, lavender  $6 pair  

LLEVER50pic(4).gif (109 bytes) Dia Compe hoods: White for Alpha levers, both marked left but are symmetrical except for markings (see picture). $4 pair  

LLEVER97pic(4).gif (109 bytes) Cane Creek SCR-5 : The SCR-5 levers are a current aero lever with a slightly larger body somewhat similar to the Campagnolo Ergo Power levers.  Black levers with black hoods.  $49.99  

LLEVER98pic(4).gif (109 bytes) Cane Creek SCR-5 : The SCR-5 levers are a current aero lever with a slightly larger body somewhat similar to the Campagnolo Ergo Power levers.  Polished levers with gum colored hoods.  $49.99  

LBRAKE7pic(4).gif (109 bytes) Shimano Tourney Center-Pull: approx. 47-63mm reach, long bolt for front (you could switch bolts from another brake for front use).  $12 each  

Derailleurs For other shift components  CLICK HERE  
RDER93pic(4).gif (109 bytes) Suntour V Luxe rear and Suntour SL front derailleurs: nice 1970's era derailleur pair, short cage V Luxe rear and SL front for 28.6 seat tubes, nice condition, could use a little cleaning.  $45  

RDER121pic(4).gif (109 bytes) Campagnolo Nuovo Record rear:1972,  cracked pulleys, couple of pretty light scuffs.  $45  

RDER122pic(4).gif (109 bytes) Campagnolo Nuovo Record rear:1972, 2 cracked pulleys, couple of pretty light scuffs.   $40  

RDER125pic(4).gif (109 bytes) Campagnolo Nuovo Record rear: 1980, couple of pretty light scuffs.  $45  

FDER33pic(4).gif (109 bytes) Suntour 4050: 1.25" clamp, alloy clamp and body, double.   $15  

FDER75pic(4).gif (109 bytes) Dura Ace FD7400: 28.6 derailleur, normal cage wear  $35