|
Cranks - Pedals - Bottom Brackets Click here for a condition guide
|
| Description | Condition | Age | Price | Purchase | |
|
LCRANK25 |
Stronglight: 170 mm right arm, 122 mm BCD, English thread | Very Good | 1970's | $20 | |
|
LCRANK31 |
Shimano Deore XT: 46 tooth Biopace chain ring, 110 BCD, 5 bolt, hard to find | NOS | 1990's | $25 | |
|
LCRANK32 |
Suntour Power Ring: Micro Drive 42 tooth chain ring, 94 BCD, hard to find | NOS | 1990's | $25 | |
|
LCRANK35 |
Shimano Deore XT mid ring: 5 arm, 94 mm BCD, 32 tooth, with pick up teeth | NOS | 1990's | $18 each | |
|
LCRANK36 |
Specialized Crank Caps: metal caps, 5mm Allen | NOS | 1980's | 2 pair $10 | |
|
LCRANK38 |
Gray Crank Caps: plastic caps, 5mm Allen | NOS | 1980's | 2 pair $7 | |
|
LCRANK41 |
Campagnolo: 42/52, 170 mm arms, rusty bolts (Campy), light pitting, square/11 date | Good | 1980's | $70 | |
|
LCRANK50 |
Shimano Bio Pace 110 BCD Chain ring: 44 tooth outer chain ring | New, some minor shop wear | 1980's | $25 | |
|
LCRANK51 |
92? BCD Chain ring: appears to be a 92 BCD chain ring, 36 teeth and the bolt holes are smaller than normal, 92 is listed as Dura-Ace triple inner | New, some minor shop wear | 1980's | $25 | |
|
LCRANK56 |
Suntour XC Right crank arm: 175 mm length, 110/74 mm BCD, great to use with any generic left arm (price is for 1 arm, the picture shows the front and back side) | NOS | 1992 | $28 each | |
|
LCRANK61 |
Campagnolo Nuovo Record cranks: 170 mm length, 42/52 Campy alloy rings, diamond 4/5 date code, rings are worn, Campy chain ring bolts (some chrome flaking), appears to have the small crack at the webbing typical of Campy cranks | Fair+ | 1970's | $110 | |
|
LCRANK68 |
Stronglight cranks: 170 mm length, 42/52 drilled rings, 130mm BCD, one dust cap, English threaded, need cleaned | Good | 1970's |
$75
|
|
|
LCRANK71 |
Sakae SX cranks: 170 mm length, 28/38/48 rings, 110/74mm BCD, no dust caps, some shoe rub, dirty | Good | 1980's | $70 | |
|
LCRANK83 |
Suntour XCE cranks : 47/110mm BCD cranks, steel 28/40/50 rings, 175mm arms, typical shoe rub, | Good | 1980's | $45 | |
|
LCRANK84 |
Campagnolo Triomphe cranks : 116mm BCD, 170mm arms, 42/53 Campagnolo chain rings, Campy bolts, light wear, average shoe rub, minor front derailleur rub | Good+ | 1980's | $80 | |
|
LCRANK85 |
Stronglight steel cottered cranks : 3 pin crank, neat Stronglight logo, 42/52 rings, 170mm arms, light corrosion that should mostly clean up | Good | 1970's | $20 | |
|
LCRANK98 |
Campagnolo Super Record crank set: 170mm arms, 42/53 Campy rings, circle 2 date on back of arms. Four Campy bolts, one Ofmega bolt, shoe and front derailleur rub | Good+ | 1980's | $175 | |
|
LCRANK100 |
Sugino to fit TA pattern : 28 tooth, silver, these will fit the TA Cyclotourist cranks or the Sugino made copies. | NOS | 1980's | $15 | |
|
LCRANK101 |
Sugino to fit TA pattern : 36 tooth, silver, these will fit the TA Cyclotourist cranks or the Sugino made copies. | NOS | 1980's | $18 | |
|
LCRANK103 |
Raleigh cottered crank with Heron chain ring : 46 tooth chain ring, cottered, 9/19" pedals, chrome is very lightly pitted, arms are more square on the edges | Good | 1980's | $30 | |
|
LCRANK105 |
Shimano Deore XT FC-M730: cold forged arms, 175mm, stainless 24, alloy 34/40, heavy shoe and toe clip wear, rings have moderate wear,110mm BCD | Fair | 1980's | $40 | |
|
LCRANK107 |
Shimano Deore FC-MT60 crank with Rock Ring :175mm arms, 110 BCD, 24/36/46 with a black Rock Ring, usual shoe wear, rings are moderately-heavily worn, end of the right arm has a good number of rock scuffs | Fair+ | 1980's | $40 | |
|
LCRANK111 |
Sugino XD triple crank : 110 BCD, 175mm arms, hidden 5th bolt, 24/38/48 rings, moderate + wear, inner bolts are too long and have spacers behind them (1 bolt missing), right arms has extra scuffing | Good- | 1980's | $45 | |
|
LCRANK118 |
Campagnolo Croce D'Aune? road crank : not 100% sure of the model, 42/53 Campagnolo rings, Campagnolo self-extracting crank arm bolts, Campagnolo chain ring bolts, 170mm arms, average toe clip and shoe wear marks, rings still have some life left in them, one set of weird marks across the face of the arms (almost looks like someone drug sand paper across them in one spot?) | Good | 1980's | $85 | |
| Pedals | |||||
|
LPEDAL21 |
Look: One good pedal and one needs parts | Good | 1990's | $15 pair | |
|
LPEDAL34 |
Christophe toe straps:White woven straps, longer mountain length | NOS | 1980's | 3 pair $12 | |
|
LPEDAL35 |
Christophe toe straps:White woven straps | NOS | 1980's | 3 pair $12 | |
|
LPEDAL37 |
Sugino toe straps:White woven straps, | NOS | 1980's | $4 per pair | |
|
LPEDAL38 |
Sugino toe straps:Light blue woven straps | NOS | 1980's | $4 per pair | |
|
LPEDAL41 |
Suntour pedal spindle:1045R, Left side, 9/16" | NOS | 1980's | $5 each | |
|
LPEDAL42 |
Suntour pedal spindle:1045R, Right side, 9/16" | NOS | 1980's | $5 each | |
|
LPEDAL45 |
SR pedal spindle:955042, Left side, 9/16" | NOS | 1980's | $5 each | |
|
LPEDAL46 |
SR pedal spindle:955043, Right side, 9/16" | NOS | 1980's | $5 each | |
|
LPEDAL50 |
Shimano toe clips for "triangle" shaped pedals: new, size medium, only fits Shimano pedals, plastic | New | 1990's | $20 pair | |
|
LPEDAL54 |
Shimano toe clips for "triangle" shaped pedals: new, size X-large, only fits Shimano pedals, plastic | New | 1990's | $20 pair | |
|
LPEDAL55 |
Shimano toe clips for "triangle" shaped pedals: new, size large, only fits Shimano pedals, plastic | New | 1990's | $20 pair | |
|
LPEDAL65 |
MKS AR-2 road quill pedals: all alloy, all black (moderate wear), Christophe clips and straps, both end caps, dirty | Good- | 1980's | $20 | |
|
LPEDAL67 |
onZa HO clipless pedals cleats: for everybody who loves running the old pedals. Here is a way to keep 'em going, includes all mounting hardware, 6 or 10 degree | NOS | 1990's | $15 pair | |
|
LPEDAL68 |
onZa HO clipless pedals elastomers: for everybody who loves running the old pedals. Here is a way to keep 'em going, clear, blue, gray and black included | NOS | 1990's | 2 sets for $15 | |
|
LPEDAL69 |
onZa HO clipless pedals rebuild kit: for everybody who loves running the old pedals. Here is a way to keep 'em going, 2 bushings, 2 bearing, 2 end caps, 2 seals and 2 O-rings | NOS | 1990's | 2 sets for $12 | |
|
LPEDAL70 |
onZa HO clipless pedals guide plate kit: for everybody who loves running the old pedals. Here is a way to keep 'em going, 4 guide plates and screws | NOS | 1990's | 2 sets for $10 | |
|
LPEDAL71 |
onZa HOX clipless pedals rebuild kit: for everybody who loves running the old pedals. Here is a way to keep 'em going, 2 bushings, 2 bearing, 2 end caps, 2 inner seals and 2 outer seals | NOS | 1990's | 2 sets for $6 | |
|
LPEDAL72 |
onZa HOX clipless pedals end caps kit: for everybody who loves running the old pedals. Here is a way to keep 'em going, 2 Allen keyed threaded end caps, fits HOX and probably HO pedals as well as others? | NOS | 1990's | 2 sets for $6 | |
|
LPEDAL73 |
onZa HOX clipless pedals plate kit: for everybody who loves running the old pedals. Here is a way to keep 'em going, set of 4 plates to replace damaged ones on the HOX pedals | NOS | 1990's | 2 sets for $6 | |
|
LPEDAL74 |
onZa HOX clipless pedals bolt kit: for everybody who loves running the old pedals. Here is a way to keep 'em going, counter sunk bolts to fit HOX pedals but will likely fit most pedals out there (these were made by Wellgo), 3 different sets of 8 (24 total) | NOS | 1990's | 2 sets for $6 | |
|
LPEDAL75 |
onZa HOX clipless pedals pin kit: for everybody who loves running the old pedals. Here is a way to keep 'em going, set of 12 threaded replacement pins, made by Wellgo and will probably fit most common BMX style pedals | NOS | 1990's | 4 sets for $5 | |
|
LPEDAL76 |
onZa HOX clipless pedals spindle kit: for everybody who loves running the old pedals. Here is a way to keep 'em going, replacement spindles, made by Wellgo, definitely fits HOX pedals, I tried them in an HO pedal and it fits but is not identical, 1/2" for 1 piece cranks | NOS | 1990's | 2 sets for $12 | |
|
LPEDAL77 |
onZa HOX clipless pedals spindle kit: for everybody who loves running the old pedals. Here is a way to keep 'em going, replacement spindles, made by Wellgo, definitely fits HOX pedals, I tried them in an HO pedal and it fits but is not identical, 9/16" for 3 piece cranks | NOS | 1990's | 2 sets for $12 | |
|
LPEDAL78 |
onZa HOX replacement BMX-style cage kit: replacement BMX style cages for HOX pedals, new kit | NOS | 1990's | $5 pair | |
|
LPEDAL79 |
Time 50.1 Road pedals: clipless road pedals, feels pretty smooth, finish is chipped around the cleat area | Good | 1980's | $45 pair | |
|
LPEDAL80 |
onZa HOX replacement cleat kit: Wellgo made cleats to fit onZa HO pedals, we checked them against a standard 98A Wellgo cleat and they appear identical except for the amount of float | NOS | 1990's | 2 pair for $15 | |
|
LPEDAL84 |
Sprint quill pedals Made in Italy: alloy cages, no end caps, Specialized clips | Fair | 1970's | $18 pair | |
|
LPEDAL85 |
Onza HO pedals: brand new in the box HO pedals, these are the (in)famous elastomer based pedals that you loved or hated, includes cleats, reflectors!, instructions and a complete set of different hardness elastomer cushions | NOS | 1990's | $60 Pair | |
|
LPEDAL87 |
Nylon toe |